01
01

01

02
02

02

03
03

03

04
04

04

Position:
Homepage
/
/
In the use of Baitu earthwork design software package (section CAD) process, when give a marked the location elevation, found "elevation Annotation" command provides a default value is wrong, why? How to solve?
In the use of Baitu earthwork design software package (section CAD) process, when give a marked the location elevation, found "elevation Annotation" command provides a default value is wrong, why? How to solve?
  • Categories: Q&A
  • Time of issue: 2020-05-11 15:52:33
  • Views: 0
Answer:

Because "elevation system variable automatic maintenance section CAD" system to change the value of the reason.

The same cross section, the elevation of the values of system variables relatively unchanged; the different cross section, the elevation of the values of system variables are not equal.

To solve this problem there are two ways:

Way, if the current figure on a known point has marked elevation, or level, or ruler, the use of "elevation calibration" command: elevation, with the mouse in the graphic symbols corresponding to the water level or scale, or symbols symbol points to take, "section CAD" system Tip elevation calibration operation is successful, the the problem is solved. The process is to modify the elevation of Gao Cheng calibration system variables.

Method two, first to present a known specific elevation section on the value point elevation: the specific operation, modify the default values for the elevation of the actual elevation known point value. The default value of the modified elevation, elevation of the values of system variables is automatically modified. And then give the feature points of other unknown elevation in the section on the values marked elevation, this system provides default values are correct.

Scan the QR code to read on your phone

Webpage Copyright:JINAN BESTTOOL WATER SCIENCE & TECHNOLOGY DEVELOPMENT CO., LTD.    ICP Register No.:鲁ICP备09073348号    Powered by www.300.cn  JINAN2